in Engineering Geology (Volume 273, August 2020)
by Justine Molron, Niklas Linde, Ludovic Baron, Jan-Olof Selroos, Caroline Darcel, Philippe Davy
Identifying fractures in the subsurface is crucial for many geomechanical and hydrogeological applications. Here, we assess the ability of the Ground Penetrating Radar (GPR) method to image open fractures with sub-mm apertures in the context of future deep disposal of radioactive waste. GPR experiments were conducted in a tunnel located 410 m below sea level within the Äspö Hard Rock Laboratory (Sweden) using 3-D surface-based acquisitions (3.4 m × 19 m) with 160 MHz, 450 MHz and 750 MHz antennas. The nature of 17 identified GPR reflections was analyzed by means of three new boreholes (BH1-BH3; 9–9.5 m deep). Out of 21 injection and outflow tests in packed-off 1-m sections, only five provided responses above the detection threshold with the maximum transmissivity reaching 7.0 × 10−10 m2/s. Most GPR reflections are situated in these permeable regions and their characteristics agree well with core and Optical Televiewer data. A 3-D statistical fracture model deduced from fracture traces on neighboring tunnel walls show that the GPR data mainly identify fractures with dips between 0 and 25°. Since the GPR data are mostly sensitive to open fractures, we deduce that the surface GPR method can identify 80% of open sub-horizontal fractures. We also find that the scaling of GPR fractures in the range of 1–10 m2 agrees well with the statistical model distribution indicating that fracture lengths are preserved by the GPR imaging (no measurement bias). Our results suggests that surface-GPR carries the resolution needed to identify the most permeable sub-horizontal fractures even in very low-permeability formations, thereby, suggesting that surface-GPR could play an important role in geotechnical workflows, for instance, for industrial-scale siting of waste canisters below tunnel floors in nuclear waste repositories.
Access to full article
Access to dataset
More on ESR 4 research project
in HESS (April 2020)
by Andrea Palacios, Juan José Ledo, Niklas Linde, Linda Luquot, Fabien Bellmunt, Albert Folch, Alex Marcuello, Pilar Queralt, Philippe A. Pezard, Laura Martinez, Laura del Val, David Bosch, Jesus Carrera
Surface electrical resistivity tomography (ERT) is a widely used tool to study seawater intrusion (SWI). It is noninvasive and offers a high spatial coverage at a low cost, but its imaging capabilities are strongly affected by decreasing resolution with depth. We conjecture that the use of CHERT (cross-hole ERT) can partly overcome these resolution limitations since the electrodes are placed at depth, which implies that the model resolution does not decrease at the depths of interest. The objective of this study is to test the CHERT for imaging the SWI and monitoring its dynamics at the Argentona site, a well-instrumented field site of a coastal alluvial aquifer located 40 km NE of Barcelona. To do so, we installed permanent electrodes around boreholes attached to the PVC pipes to perform time-lapse monitoring of the SWI on a transect perpendicular to the coastline. After 2 years of monitoring, we observe variability of SWI at different timescales: (1) natural seasonal variations and aquifer salinization that we attribute to long-term drought and (2) short-term fluctuations due to sea storms or flooding in the nearby stream during heavy rain events. The spatial imaging of bulk electrical conductivity allows us to explain non-monotonic salinity profiles in open boreholes (step-wise profiles really reflect the presence of freshwater at depth). By comparing CHERT results with traditional in situ measurements such as electrical conductivity of water samples and bulk electrical conductivity from induction logs, we conclude that CHERT is a reliable and cost-effective imaging tool for monitoring SWI dynamics.
Full article here
More on ESR14 research project
in Water (April 2020)
by Lara Blazevic, Ludovic Bodet, Sylvain Pasquet, Niklas Linde, Damien Jougnot, Laurent Longuevergne
The vadose zone is the main host of surface and subsurface water exchange and has important implications for ecosystems functioning, climate sciences, geotechnical engineering, and water availability issues. Geophysics provides a means for investigating the subsurface in a non-invasive way and at larger spatial scales than conventional hydrological sensors. Time-lapse hydrogeophysical applications are especially useful for monitoring flow and water content dynamics. Largely dominated by electrical and electromagnetic methods, such applications increasingly rely on seismic methods as a complementary approach to describe the structure and behavior of the vadose zone. To further explore the applicability of active seismics to retrieve quantitative information about dynamic processes in near-surface time-lapse settings, we designed a controlled water infiltration experiment at the Ploemeur Hydrological Observatory (France) during which successive periods of infiltration were followed by surface-based seismic and electrical resistivity acquisitions. Water content was monitored throughout the experiment by means of sensors at different depths to relate the derived seismic and electrical properties to water saturation changes. We observe comparable trends in the electrical and seismic responses during the experiment, highlighting the utility of the seismic method to monitor hydrological processes and unsaturated flow. Moreover, petrophysical relationships seem promising in providing quantitative results.
Full article here
More on ESR5 research project
in Geophysical Journal International Volume 220, Issue 2, February 2020, Pages 1187-1196
by Satoshi Izumoto, Johan Alexander Huisman, Yuxin Wu, Harry Vereecken
Induced calcite precipitation is used in geotechnics to modify the mechanical and hydrological properties of the underground. Laboratory experiments have shown that spectral induced polarization (SIP) measurements can detect calcite precipitation. However, the results of previous studies investigating the SIP response of calcite precipitation were not fully consistent.
This study aims to investigate how the SIP response of calcite depends on solute concentration to explain the differences in SIP response observed in previous studies. A four-phase experiment with SIP measurements on a column filled with sand was performed. In phase I, calcite precipitation was generated for a period of 12 d by co-injecting Na2CO3 and CaCl2 solutions through two different ports. This resulted in a well-defined calcite precipitation front, which was associated with an increase in the imaginary part of the conductivity (σ′′σ′′). In phase II, diluted solutions were injected into the column. This resulted in a clear decrease in σ′′σ′′. In phase III, the injection of the two solutions was stopped while calcite precipitation continued and solute concentrations in the mixing zone decreased. Again, this decreased σ′′σ′′. Finally, the injection rate of the Na2CO3 solution was reduced relative to that of the CaCl2 solution in phase IV. This resulted in a shift of the mixing zone away from the calcite precipitation front established in phase I and an associated decrease of σ′′σ′′.
These results imply that the SIP response of calcite is highly sensitive to the solute concentration near the precipitates, which may explain previously reported conflicting results.
Full article here
More on ESR12 research project